1. The oil suction strainer at the inlet of the tower air purifier pump;

2. The high-pressure oil filter on the oil circuit of the pump outlet;

3. The low pressure oil filter on the oil return circuit of the system;

4. Bypass filter system installed outside the system.

5. Since the activated carbon adsorption function of the tower air purifier has a certain saturation value, when the saturated adsorption capacity is reached, the adsorption function of the activated carbon filter will be greatly reduced, so it is necessary to pay attention to analyze the adsorption capacity of the activated carbon, and replace the activated carbon in time or use high-pressure steam. Disinfection resumes. It is worth noting that in the initial stage of using activated carbon (or at the beginning of replacing activated carbon), a small amount of very fine powdered activated carbon may enter the reverse osmosis equipment system with the water flow, causing the flow channel of the reverse osmosis membrane to be blocked and cause operating pressure. Elevation, reduced permeate production and increased pressure drop in the system, and this damage is difficult to recover with conventional cleaning methods. Therefore, the activated carbon must be rinsed and the fine powder removed before the filtered water can be sent to the subsequent RO system.

tower air purifier https://www.kaisenfilter.com/KS-Series-Air-Purifying-Tower